Electric Element Only

Standard Element

IP55 Suitable for zones 1 and 2 of the bathroom. Each standard element contains a preset surface temperature control along with a back up fail safe, this is the only temperature control supplied, for more flexibility over the surface temperature we recommend using our AC012 (rheostat), this will give you surface temperature modulation, when fitted into the electrical supply circuit.

Element cable length 1.5m.

EE00250w, 75w, 100w, 125w, 150w, 200w, 300w, 400w, 600w

Heat Sensor Element

IPX5 suitable for zones 1 and 2 of the bathroom. Five temperature settings ranging from 30°C to 60°C.The device displays the temperature to which it is currently set and indicates the status of the heating cycle.

Available in Chrome, Black, Gold and White.

Element cable length 1.5m.

Product Watts
EE006 200w, 300w, 400w, 600w, 800w, 1000w

Electronique Element

IP66 Suitable for zones 1 and 2 of the bathroom. The standard Electronique element is set to a constant surface temperature of 52°C, with no need for external controls. In the fully loaded towel warming mode it will act to reduce power and save running costs. In space heating mode it will increase the power to deliver background heat needed to the maximum of its rated capacity. A safe to touch system, with safety measures incorporated.

Element cable length 1m.

EE001A200w, 400w, 600w

Remote Controlled & In-App Heat Element

IPX4 suitable for zones 1 and 2 of the bathroom. Negative Temperature Coefficient technology 7 day programmable element with remote control switches the towel rail on and off when you want, at the temperature you want. Eco, boost and safety lock features included, and manual override allows you total flexibility when needed. Can be retro fitted to existing electric or dual fuel multirail towel rails.

Element cable length 1.4m.

*Remote control sold separately.

EE005300w, 600w

Contract Fixed Heat / LST Electronique Element

IP55 Suitable for zones 1 and 2 of the bathroom. Fixed Heat is designed as an energy saving element to control temperature and consume only the correct amount of power required. It maintains your pre-set temperature whether the rail is in a cold bathroom empty or fully loaded with towels. Fixed Heat for LST (low surface temperature) of 43°C must be chosen to comply with LST legislation for use in public buildings, hospitals and care homes.

Element cable length 1m.

Product Watts
EE001C 200w, 400w, 600w

Please note : Electric element position will vary depending on the style of product.

Dual fuel models will also be supplied with a conversion tee where applicable. This can be used with VL013 valves for a mulitrail. Alternatively to a conversion tee dual fuel valves VL015 can be used.

All the images of elements depict electric only versions. Dual fuel configurations may vary including element positioning. The appropriate standard versions will be supplied in all cases unless advised otherwise.

Electric towel rails are filled with a glycol ethylene / water mix to strict guidelines. This improves the thermal transfer rate and acts as a corrosion inhibitor.

All electric and dual fuel towel rails must be fitted by a qualified person.
The elements are fitted on the right hand side as standard. They can be left hand mounted on request, on certain rails only.

We use cookies to improve your experience. By continuing, you consent to our privacy policy.

Scroll to Top